Products

Home/Products
    • Both the PTZlink 30W and 60W Power Over Ethernet Injectors have a single-Port Gigabit Ethernet input and 1 PoE+ Gigabit Ethernet port output offer full-duplex 2Gbps Ethernet speeds.
    • PTZlink 30W & 60W PoE injector follows the PoE standard IEEE802.3af, IEEE802.3at, which is considered to use active PoE. This means that the 802.3af/at injector will check the power coming in and if the power doesn't meet the device requirements it won't get powered up, ensuring the safety of the PoE device. Normally, 802.3 af/at/bt PoE voltage will always be 44 to 57 volts DC.
    • Converts a non-PoE Gigabit port to a PoE+ Gigabit port and Networks a PoE device located up to 100 meters (328 ft.) away. Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios.
    • PoE injector excels in sending data while providing PoE to standard-based PoE, PoE+, and PoE++ compliant devices. In a practical application scenario, a PoE injector functions as an intermediary to connect non-PoE switches and PoE-compliant devices. The devices like IP cameras or WAPs will be powered by the PoE injector.
    • PoE port power supply – PoE vs PoE+ vs PoE++: Make sure your injector's PoE standard is compliant with your PDs. There are three main PoE standards –802.3af (PoE), 802.3at (PoE+), 802.3bt (PoE++). They support a power supply of up to 15.4 W, up to 30 W, and up to 60 W /90 W respectively.
    • This POE injector gigabit converts a non-PoE Gigabit port to a PoE+ Gigabit port and network a PoE device located up to 100 meters (328 ft.) away. The PoE injector power supply will power up PoE cameras up to 100 meters only with an Ethernet cable, no electric wires required to arrange. Save time and money on installing PoE IP cameras.
    • With this POE 48V injector's auto-sensing technology delivers up to 60W to a PoE+ device with backward compatibility for 802.3at(30w) and 802.3af PoE (15.4W) devices. The passive POE injector power up to 60W that will work with a wide range of PoE cameras, especially for PTZ camera.
    • Plug and Play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios. the poe++ injector 60w automatically adjusts network speed, cabling type as well as the power required according to connected PoE cameras.
    • 1 Gigabit Ethernet port input and 1 PoE+ Gigabit Ethernet port output offer full-duplex 2Gbps Ethernet speeds. High-Performance Gigabit PoE/PoE+ injector, IEEE 802.3af/802.3at compliant. Pin Assignment and Polarity: 1/2 (-), 3/6 (+),4/5(+), 7/8(-)
    • Integrated 10/100/1000Mbps port with AutoUplink. IEEE 802.3af/at power on up to POE ports. Data transmission in gigabit speed. The package includes the PoE injector and power line. The item comes with a one-year product warranty.
    • Gigabit PoE Plus Injector: one Gigabit Ethernet port input and one PoE / PoE+ / PoE++ Gigabit Ethernet port output offer full-duplex 2Gbps Ethernet speeds. Widely used on different devices, ideal for small installations of PoE IP phone, PoE surveillance camera, or PoE wireless access point.
    • Hight Power Up to 90w: Input AC100-240V 50/60Hz, Output Data & Power 90 watt, make this gigabit PoE injector【NOT ONLY】works with IEEE 802.3af devices【BUT ALSO】with high-power devices like 802.3at devices (more than 30 Watt), such as IP PTZ camera, big power AP, etc.
    • with this ethernet injector's auto-sensing technology, it can deliver up to 90W to a PoE++ device with backward compatibility for 802.3bt(60w), 802.3at(30w), and 802.3af PoE (15.4W) devices.
    • High-Quality Chipset Inside: Use TPS high-quality POE chip to ensure the stable operation of the product. Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios, the device has a compact size makes it easy to install the adapter into areas where space is limited, without configuration required.
    • High Performance Gigabit PoE++ / PoE+ PoE plus injector, IEEE 802.3bt / 802.3af / 802.3at compliant. Pin Assignment and Polarity: 1/2 (-), 3/6 (+),4/5(+), 7/8(-), provides remote power to equipment through CAT5/5e/6 Ethernet cable up to 1000Mbps.
    • Gigabit Ethernet port input & one PoE+ Gigabit Ethernet port output offer full-duplex 2Gbps Ethernet speeds.
    • Auto-sensing technology delivers up to 30W to an 802.3at PoE+ device with backward compatibility for 802.3af PoE (15.4W) devices.
    • Converts a non-PoE Gigabit port to a PoE+ Gigabit port and Network a PoE device located up to 100 meters (328 ft.) away.
    • Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios.
    • 30W Gigabit PoE Injector adapter is IEEE 802.3af/802.3at compliant.

Title

Go to Top